KNG® HT-N is a neutral cure, elastic, single component engineering sealant based on silicone which withstands very high temperature.
Sealing of heating installations.
Gasket in engines, pumps and motors.
Sealing between metals and plastci which are exposed to high temperatures..
All sealants applications which require high temperature resistance.
Permanently elastic after full cure.
Neutral cure, high modulus.
High bond strength.
Withstands temperatures of upto 360°C.
KNG® HT-N is available three standard colors and other colors base on custormers' requirements.
Interface and surfaces must be clean, dry and free of dust, dirt, oil and and release agents. Cut cartridge nozzle at slant to 1/4" hole and puncture inner seal, apply bead size as desired.
Apply uniform bead with steady pressure. Tool immediately after application to ensure full contact with both sides of the joint area. Sealant starts to skin over in 6-10 minutes. See data sheet for further details and limitations.
300ml plast cartridge, 24PCS/CTN
Dimensions for 24pcs of 300ml: 25×25×20 (cm)