KNG Sealant Co.,Ltd  
English Chinese
KNG Sealant Co.,Ltd
HOME ABOUT US PRODUCTS F.A.Q. NEWS & EVENTS CONTACT US
Products Catagory
Silicone Sealant
Gasket Maker
PU Foam
PU Sealant
Acrylic Sealant
UV Adhesive
Threadlock(Anaerobic Adhesive)
Liquid Nails
Super Glue(Cyanoacrylate Glue)
Accessories
Testing Certificates
Search Products
Contact Us
KNG SEALANT CO.,LTD
TEL: +86-757-22909059
FAX: +86-757-22909259
E-MAIL: sales@kngsealant.com
KNG-L201 LIQUID NAILS SUBFLOORS & DECKS

Description:
KNG-L201 max bond fast grip construction adhesive is formulated with strong initial grab which makes it ideal for installing wall paneling,flooring,stiring boards and architraves. KNG max bond fast grip construction adhesive has no fumes and can be cleaned up with water.

Recommended use:
particleboard, plywood, fibre cement and strio flooring to joists, fibre cement sheet, plasterboard and wall paneling to wooden and metal studs, skirting boards, architraves and trims to walls, replacing loose tiles on walls(not recommended for floor tiles), suitable for sixing polystyrene wall panels, timber and other porous construction materials.

Substrates:
wood, particleboard, MDF, concrete, cement sheet, gypsum board, cement render, polyurethane foam, expanded polystyrene, plywood

Compliance:
KNG max bond fast grip construction adhesive has been formulated to comply with the requirements of AS2329-1980 Mastic Adhesives for Fixing Wallboards.

Benefits:
1. Versatile multiple uses
2. Fast initial grab minimizes slippage on vertical surfaces.
3. Easy clean up use water
4. Flows easily at all temperatures
5. High bond strength and heat resistance when cured(service temperature up to 90)
6. High bond strength exceeds AS2329,mastic adhesives for fixing wallboards.
7. No fumes water based
8. Strong adhesion to metal when other surface is porous.
9. Bridges gaps up to 9 mm effective when used on uneven surfaces
10. One part no mixing
11. Paintable with water based surface coatings
12. Reduces squeaking associated with nail ride in floors
13. Complies with AS 2329 1980
14. Can be repositioned for up to 60 minutes after application
15. Reduces number of mechanical fasteners required to install floors or walls
16. Natural wood colour blends in
 

TECHNICAL DATA
Base
Synthetic rubber & resin
Type
Solvent
Volatile Content (%) ≤9
Appearance
Smooth
Application Temperature
-15° to 38° C
Service Temperature
-29° to 100° C
Fast Adhesion
Excellent
Consistency
Short buttery
Bridging Ability
Excellent
Extrudability
Easy
Durability
Excellent; 20 year life
Flexibility
Excellent
Water Resistance
Excellent
Working Time
20 minutes
Flammability
Extremely flammable; nonflammable when dry
Flash Point
0°C
Viscosity
230,000 CPS
Bonding Strength (Mpa) ≥ 3
Fixture Time (h) 0.5
Touch Dry Time(Min) 2
Max Strength (day) 7
Fully Curing Time (h) 12~72
Freeze/Thaw Stability stable
Working Time,1/4"bead(min) 20
Super Bonding Strength 30KG/cm2
Shelf Life
24 months from date of purchase, stored below 27° C

PRODUCT ADVANTAGES
1. Strong bond will outlast project
2. Waterproof & Weatherproof
3. Bonds a wide range of construction materials
4. Interior & Exterior
5. 100% Satisfaction Guaranteed
6. Strong, Durable and Flexible
7. Exceptional holding power

DIRECTIONS:
Preparation: Surfaces must be clean, dry and structurally sound.
1. Cut nozzle at a 45° angle to desired size.
2. Puncture inner seal with nail or wire.

Cabinets and counter tops: Apply a 1/4" bead to contact areas on the back of cabinets or counter tops. Press firmly into place. Mechanical fasteners must also be used for installing wall cabinets. Materials to furring strips or studs: Apply zigzag 1/4" bead to each strip or stud to be covered by panel. Position panel so edges meet at stud center; only severely warped materials require finishing nails at top and bottom.

CLEAN-UP
Use mineral spirits or an adhesive remover.

DISPOSAL
Contains organic solvents which may cause adverse effects to the environment if disposed of improperly. Place empty containers in normal refuse for disposal. Contact your sanitation department or household hazardous waste coordinator for information concerning possible re-use or disposal of unused solvent-containing adhesives and/or sealants.

DANGER! EXTREMELY FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED. VAPORS MAY CAUSE FLASH FIRE.


|    HOME    |    ABOUT US    |    PRODUCTS    |    F.A.Q.    |    NEWS & EVENTS     |    CONTACT US    |
© 2002~2009 KNG SEALANT CO., LTD. All rights reserved. Supported by elut.cn