KNG Sealant Co.,Ltd  
English Chinese
KNG Sealant Co.,Ltd
HOME ABOUT US PRODUCTS F.A.Q. NEWS & EVENTS CONTACT US
Products Catagory
Silicone Sealant
Gasket Maker
PU Foam
PU Sealant
Acrylic Sealant
UV Adhesive
Threadlock(Anaerobic Adhesive)
Liquid Nails
Super Glue(Cyanoacrylate Glue)
Accessories
Testing Certificates
Search Products
Contact Us
KNG SEALANT CO.,LTD
TEL: +86-757-22909059
FAX: +86-757-22909259
E-MAIL: sales@kngsealant.com
DRIKO Sealing Compound Gasket Maker

DESCRIPTION:
Driko Sealing Compound is a paste-like, cold-vulcanizing, elastic sealing and filling compoud based on silicone rubber. This "gasket maker" gives excellent adhesion to metallic and non-metallic surfaces. Even if fissures, cracks, and joint movements are present, Driko guarantees a secure seal. It has a variety of uses as a gasket, as an addition to a gasket, or as a sealant from the outside. Driko stops oil, water, and air leaks. This product is used to seal surfaces, gaps and cracks, including components that are subject to distortions and motions, such as cylinder head joints, gearbox joints, sumps, bearing casings, instrument casings, waterpumps, axle tube, engines, machines, pumps, ships, equipment assemblies as well as in connection with drying, air-conditioning and cooling units and for hobby needs and many other parts that requires sealing.  Wipe on a thin coat, let it skin up then install the parts. Also great for Valvecover Gaskets, Oil Strainer and Generator Stand Gaskets, etc. Temperature range of Driko is from approximately -50C to approximately +180C.

PROPERTIES:
Neutral hardening
Easy to use gasket maker 
Works great on most surfaces 
Long lasting durable seal 
Permanently-elastic, temperature-resistant sealing 
    compound

APPLICATION AND PROCESSING:
The surfaces to be sealed have to be cleaned and degreased, preferably using spirit or similar solvent. Hardened silicone remnants can be removed using KNG recommended special silicone solvent. Perfect sealing or adherence of the sealing compound when fully cured is ensured only if the surfaces are absolutely clean and grease-free.

NOTE:
If too much sealing compound is applied, it can drip into the interior. Depending on requirements, the parts can be assembled either immediately after application, after the skin has formed or after full curing. When sealing without disassembly, e.g. in the case of joints or cracks, Driko can also be applied on the outside if the surface is thoroughly cleaned. Equipment assemblies sealed in this way should only be operated again after approximately 30 minutes. In the fully cured state, Driko is physiologically safe.

WARNING:
Keep out of reach of children.
Processing: mechanically or pneumatically equipment operated hand-held pistols or automatic dosing systems. Supplier information on request.
Equipment Cleaning: Spirit, only mechanical removal once compound is fully cured.

STORAGE:
Storage:
store in a cool, dry place (room temperature).
Storage life: 12 months in an unopened container

Color: Grey    
Content: 70ml/100g    
Packing: Cardboard box with tube

 

GM-003G

|    HOME    |    ABOUT US    |    PRODUCTS    |    F.A.Q.    |    NEWS & EVENTS     |    CONTACT US    |
© 2002~2009 KNG SEALANT CO., LTD. All rights reserved. Supported by elut.cn